CHN SPEC CS-600B Portable Spectrophotometer (d/8, 400~700nm, 4mm/6mm, 0.5s)

Illumination: d/8 (Diffuse illumination, 8-degree viewing angle), simultaneous SCI (Specular Component Included) / SCE (Specular Component Excluded) measurement. (Complies with CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards)

Size of Integrating Sphere: Φ40mm, Alvan diffuse reflection surface coating

Light Source: CLED (Full wavelength balanced LED light source)

Wavelength Range: 400-700nm

Observer Angle: 2°/10°

Measurement Illuminants: A, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DLF, TL83, TL84, NBF, U30, CWF

Measurement Aperture: Φ6mm/Φ4mm

Displayed Data: Spectral distribution/SPD data, sample color values, color difference values/graphs, pass/fail results, color error tendency, color simulation, measurement area display, historical data color simulation, manual standard sample input, measurement report generation

Measurement Time: 0.5 seconds

Color Space: CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance, Hunterlab, Munsell MI, CMYK, RGB, HSB

Color Difference Formulas: ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc(2:1), ΔE*cmc(1:1), ΔE*94, ΔE*00, ΔEab(Hunter), 555, color classification

Other Colorimetric Indices: WI (ASTM E313-10, ASTM E313-73, CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby); YI (ASTM D1925, ASTM E313-00, ASTM E313-73); Tint (ASTM E313, CIE, Ganz)

Metamerism Index Milm, Staining Fastness, Color Fastness, ISO Brightness, 8° Gloss, Density A, Density T

Repeatability:

Spectral Reflectance: Standard deviation within 0.08%

Color Value: ΔE*ab<=0.03 (After calibration, standard deviation of 30 measurements on a white calibration tile at 5-second intervals), Maximum: 0.05

Battery Capacity: Rechargeable, 10,000 continuous tests, 7.4V/6000mAh

Light Source Lifespan: 10 years, 3 million tests

Inter-instrument Agreement: ΔE*ab within 0.2 (BCRA II Color Tiles, average of 12 tiles)

Dimensions: 181*73*112mm (L*W*H)

Weight: Approx. 550g (excluding battery weight)

Display: True color screen

Operating Temperature Range: 0~45℃, relative humidity 80% or below (at 35°C), non-condensing

Practical Applications

• Plastics & Polymers: Measuring the color of plastic pellets, injection-molded plastic components, and electronic device casings to ensure batches do not suffer from color deviations due to temperature or pigment mixing ratios.
• Paints & Coatings: Verifying the color accuracy of water-based paints, powder coatings, and automotive paints, helping paint factories match precise color formulas against standard color charts (Pantone, RAL).
• Textiles & Footwear: Managing the color of fabric rolls, artificial leather materials, zippers, and garment accessories before they enter the sewing/assembly line.
• General Manufacturing: Widely applied in food processing, pharmaceuticals, cosmetics, and ceramic tiles, where color is a decisive factor in aesthetics and consumer quality perception.