CHN SPEC DS-60 Horizontal Spectrophotometer (D/8, SCI+SCE, dE*ab≤0.02, Φ11mm)

CHN SPEC DS-60 Horizontal Spectrophotometer (D/8, SCI+SCE, dE*ab≤0.02, Φ11mm)

The CHN SPEC DS-60 horizontal spectrophotometer is the standard version in the CHN SPEC benchtop color measurement device series. With a horizontal measurement port design and focusing on a single measurement aperture, this device provides stable performance, easy operation, and is an economical, efficient choice for color inspection needs of uniform samples.

Outstanding Features

International standard optical system (D/8, SCI+SCE): The device is equipped with a diffuse illumination geometric structure, 8-degree viewing angle (D/8). Similar to high-end models, the DS-60 supports simultaneous measurement of both SCI (Specular Component Included) and SCE (Specular Component Excluded) modes. This helps accurately analyze the true color of the material and evaluate the impact of surface gloss/roughness.

High repeatability and stability: The DS-60 possesses a high-quality optical sensor system, providing very good repeatability at dE*ab ≤ 0.02. Measurement results always ensure high consistency, helping to eliminate deviations caused by visual color evaluation.

Standard Φ11mm measurement aperture: The device uses a single measurement aperture sized Φ11mm. This is the most optimal size for measuring samples with flat surfaces, relatively large areas, and uniform colors, ensuring sufficient light is collected for the most accurate analysis.

Convenient Horizontal Design: The measurement port is designed horizontally, making it easy for users to place the sample close to the machine. Especially, this design is very convenient when measuring powder, granular, or liquid material samples when combined with specialized accessories such as cuvettes.

Data connection and management: The device allows direct connection to a computer (PC) via the USB port. When used in combination with color management software, users can easily set tolerances, analyze color charts, store databases, and export accurate reports.

Technical Specifications:

Measurement Structure: D/8, SCI+SCE

Simultaneous SCI+SCE Measurement: Supported

NetProf Network Calibration: /

Integrated Physical Positioning Hole: Yes

Measurement Repeatability: dE*ab≤0.02

Display Accuracy: 0.01

Light Source: Full-band balanced LED light source

UV Light Source: /

Aperture: Φ11mm

Measurement Indices/Standards: Spectral reflectance, CIE-Lab, CIE-LCh, HunterLab, CIE-Luv, XYZ, Yxy, RGB Color Difference (ΔΕ*ab, Δ E*cmc, ΔΕ*94, ΔΕ*00), Whiteness (ASTM E313-00, ASTM E313-73, CIE, ISO2470/R457, AATCC, Hunter, TaubeBerger Stensby), Yellowness (ASTM D1925, ASTM E313-00, ASTM E313-73), Blackness (My, dM), Stain fastness, Color fastness, Tint (ASTM E313-00), CMYK Color Density (A, T, Ε, Μ), Metamerism index Milm, Munsell, Hiding power, Strength (Dye strength, color strength)

Illuminant Conditions: A, B, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, CWF, U30, U35, DLF, NBF, TL83, TL84, ID50, ID65, LED-B1, LED-B2, LED-B3, LED-B4, LED-B5, LED-BH1, LED-RGB1, LED-V1, LED-V2

Software Support: Android, iOS, Windows, WeChat, HarmonyOS (Hongmeng)

Guaranteed Accuracy: Qualified measurement guaranteed

Field of View: 2°, 10°

Integrating Sphere Diameter: 40mm

Compliance Standards: CIE No.15, GB/T 3978, GB 2893, GB/T 18833, ISO7724-1, ASTM E1164, DIN5033 Teil7

Spectroscopic Method: High-precision nano spectroscopic device

Sensor: 16-group dual silicon photodiode array

Wavelength Interval: 10nm

Wavelength Range: 400-700nm

Reflectance Measurement Range: 0-200%

Reflectance Resolution: 0.01%

Measurement Time: Approx. 1 second

Interface: USB, Bluetooth

Screen: 3.5-inch full-color screen

Battery Capacity: 8000 continuous measurements on a single charge, 7.2V/3000mAh

Light Source Lifespan: 5 million cycles

Language: Simplified Chinese, English

Storage: Device: 10,000 items; APP: Mass storage

Practical Applications

With its horizontal design and large measurement aperture, the CHN SPEC DS-60 is particularly suitable for:

• Quality control (QC) departments for inspecting material samples with flat and uniform surfaces.
• Color control in the plastics industry (measuring plastic sheets, plastic films, or plastic pellets when used with accessories).
• Color evaluation of ceramic tiles, glass, coatings, and building materials.
• Color quality inspection in the textile dyeing, paper, and basic printing industries.